![background image](http://html1.mh-extra.com/html/valco-melton/isomelt/isomelt_user-manual_849620038.webp)
MUS0920201
07/10/2014 33
MELTON, S.L.U. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail: [email protected]
4.3.2.9. Automatic Pump Mode:
It is found under the settings / system / auto pump mode menu.
Use the automatic pump option so the pump works automatically or manually.
4.3.2.10. Pot Fill Mode
It is found under the settings / system / pot fill mode menu.
When the equipment is used to fill another tank and its level sensor emits a signal
to activate the pump, because it needs adhesive, we can set here a delay time for the
activation of our pump.
Pump auto mode must be ON. The external level control is wired to the external
level input on the CPU, J6.
4.3.2.11. Level Sensor:
It is found under the settings / system / level sensor menu.
With this feature, you can configure the time delay for the level sensor alarm both
for the inner and outer signals.
4.3.2.12. Filter Change:
It is found under the settings / system / filter change menu.
You enter the number of operating hours for the filter and when this time is up, the
alarm will go off indicating the filter should be changed.