![background image](http://html1.mh-extra.com/html/valco-melton/isomelt/isomelt_user-manual_849620085.webp)
MUS0920201
07/10/2014 80
MELTON, S.L.U. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail: [email protected]
A.1. DESCRIPTION
A.1.1. INTRODUCTION
Pneumatic pressure regulator. Controls the adhesive pressure to the manifold
outlet.
Prevents overpressure in the guns when starts the application.
A.1.2. MAIN PARTS
The main parts of the system are shown in the following figure:
A.1.2.1. Regulator with Pressure Gauge:
The manual control to select the desired pressure.
A.1.2.2. Solenoid valve:
Opens and closes the air inlet; in other words, it enables or disables the regulation
system.
A.1.2.3. Pressure relief Valve:
The actuator that regulates the adhesive pressure in the manifold outlet and
controls how much adhesive is re-circulated.
A.2. MACHINE INSTALLATION
A.2.1. INTRODUCTION
This chapter explains how to install the machine correctly.
Regulator
with
manometer
Solenoid valve
Pressure relief valve