![background image](http://html1.mh-extra.com/html/valco-melton/isomelt/isomelt_user-manual_849620058.webp)
MUS0920201
07/10/2014 53
MELTON, S.L.U. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail: [email protected]
Filling the tank Isomelt Plus:
It’s used with PUR adhesive
1. Open the lid and introduce the PUR block.
2. Close the lid and turn the selector to
↓ position
3. When the equipment activates the pump, the cylinder begins to press the
adhesive block.
The cylinder will move downward only if the next three conditions are true:
1. The lid is closed
2. The selector is in
↓ position
3. The pump is on.
The cylinder has two magnetic sensors:
1. The bottom sensor indicates when the adhesive block is finished.
2. The beacon is activated
3.
Then it’s necessary to shut-down the pump and turn the selector to ↑ position.
4. The cylinder goes upwards.
5. The top sensor is activated and then the beacon is deactivated.
6. Open the lid and extract the empty block.
7. Repeat the steps to fill the tank