MUS0920201
07/10/2014 9
MELTON, S.L.U. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail: [email protected]
1.2. PURPOSE:
This unit has been manufactured according to current safety standards.
This unit has been designed for the purpose described in chapter 2 of this manual,
Description.
To use the machine correctly, follow the instructions provided in the Operating
Manual, particularly:
The machine should only be installed and used by qualified personnel, previously
familiarised with the operating instructions (contacting the manufacturer
whenever necessary) and the risks involved, the safety measures required,
including adjustment and maintenance, and expressly forbidden operations.
This unit has not been manufactured to operate in hazardous, explosive and/or
flammable atmospheres
When working with this machine, wear protective clothing, gloves and face
shields and remove rings, bracelets and watches.
Since the machine is designed to form part of a series of machines, arranged to
work together, the hot melt applicator cannot be operated until the entire series
has been declared in compliance with applicable directives.
This machine should never work without the guards provided (which should not
be removed). These guards should be checked and maintained with the
specified frequency.
Make sure that the equipment is properly grounded.
Never operate the machine if you are aware that there is a leak in the glue
circuit.
Maintenance operations and/or repairs should be performed by personnel with
basic knowledge of the machine and the mechanical, pneumatic and electric
circuits involved.
Maintenance operations and/or repairs should always be performed with the
machine switched off at the mains, and with the main switch blocked.
Maintenance operations and/or repairs should always be performed with the
machine de-pressurised and disconnected from the pressure circuit.
