![background image](http://html1.mh-extra.com/html/valco-melton/isomelt/isomelt_user-manual_849620024.webp)
MUS0920201
07/10/2014 19
MELTON, S.L.U. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail: [email protected]
3.4. MECHANICAL INSTALLATION:
The mechanical installation involves the following:
Positioning the machine:
Remove the machine from the pallet using a forklift and position according to the
installation requirements (chapter 3.3). The machine features anchor holes on the legs.
Connecting the hoses:
Proceed as follows to connect the hoses:
Make sure the machine has been depressurised before
connecting the hose. Set the motor control selector to zero. Heat
the machine to melt any adhesive that may be present.
1. Remove the manifold cap. Screw the plug and socket connector together as
per the hose diameter. Apply a torque of 40 Nm.
2. Screw the hose to the connector.
3. Hook up the hose electrical connections.
4. Once the hose is at the right temperature, re-tighten the male connectors and
the hose.