MUS0920201
07/10/2014 13
MELTON, S.L.U. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail: [email protected]
2.2.1. Baseframe:
The base that supports the entire machine and where the manifold, the pump and
the motor are stored.
2.2.2. Tank:
This is where the hot-melt or other materials are melted; these materials may be in
bulk form or in chunks.
The tank is made of cast aluminium and is coated with Teflon to prevent soot and
crystallisations. It includes a resistance heating system with probe temperature control
(PT-100 or nickel, depending on the temperature control model) from the main control.
2.2.3. Grid:
It pre-melts the adhesive. It has a heating system with cartridge heaters with the
temperature controlled by a probe (PT100 or Niquel depending on the model of the
equipment).
2.2.4. Melter:
It melts completely the adhesive. . It has a heating system with cartridge heaters.
The temperature is controlled by a probe (PT100 or Niquel depending on the model of
the equipment).
2.2.5. External cover:
Prevents an accidental access to the inside of the machine, avoiding possible
interferences in the operation.
2.2.6. Dry air system:
Pneumatic system that maintains the tank pressurized at 0,3 bar with dry air or N
2
.
