![background image](http://html1.mh-extra.com/html/valco-melton/isomelt/isomelt_user-manual_849620039.webp)
MUS0920201
07/10/2014 34
MELTON, S.L.U. - POLIGONO INDUSTRIAL AGUSTINOS CALLE G-34,31160 ORCOYEN, NAVARRA
TEL: 00 34 948 321580 Fax: 00 34 948 326584 e-mail: [email protected]
4.3.3. CLOCK AND 7-DAY TIMER:
This is found under the settings / clock menu.
The Clock submenu is used to choose the day and time and to establish on/off
shifts and times and cooling/regression/rest temperatures so the system runs them
automatically.
Press the left/right keys to select the operating and rest times for each shift.
Make sure that the desired temperatures have already been established (see the
section entitled Programming Temperatures).
After entering the times, move to the right and use the +/- keys to select the shifts
to operate the machine on the chosen days.
This screen indicates that for the A shift, the resistors will begin at 7:00 AM until
the programmed temperature (pre-set on the temperatures screen) is reached and will
turn off at 3:00 PM with all of the heaters reaching the Cooling/Regression temperature
between 11:30 AM and 12:00 PM.
This screen indicates that nothing will be activated for shift C as there is no shift C.
This configuration can be activated by pressing the
key on the main
panel.