![background image](http://html1.mh-extra.com/html/valco-melton/d-90/d-90_manual_849616078.webp)
5-39
Valco Cincinnati, Inc.
Section 5 – Setup
MM125 - D-90 Hot Melt Unit
The Creep Speed Setting is the speed that the pump will run when the Auto
Speed Input is below the Minimum Speed Setting. This setting is generally
used to maintain pressure while the production line is stopped.
Pump Setup
Menu
The Speed Gain value is adjustable from 0-200%. It scales the pump speed
when using Automatic Pump Mode, when the pump speed is determined by
the Auto Speed Input. The factory default setting is 100%.
Continued on Next Page
Continued on Next Page
Continued on Next Page
Continued on Next Page
Continued on Next Page
The Minimum Speed Setting determines the minimum line speed at which the
pump turns at the creep speed setting. The units are in either milli-volts or ft/
min depending on the Auto Speed Input type (Tach or Encoder).
The Maximum Pump Speed is generally set at the factory. It is the motor
RPM divided by the reducer size (or pump speed when the motor runs at
100%). It is used to calculate and display the actual speed of the pump on
the Pump Status Screens.
Summary of Contents for D-90
