2-5
ValcoMelton
Section 2 - Safety Information
MM125 - D-90 Hot Melt Unit
Shut Down
Safety
Information
Valco Melton hot melt units, cold glue units, controllers, inspection systems
and all related accessories have the following universal safety precautions
(this is not intended to be an exhaustive list; follow all instructions and safety
precautions for the specific type of equipment involved):
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
Purge the fluid pressure and the air pressure from the
system before disconnecting/disabling any part of the
system. OTHERWISE, DEATH OR PERSONAL INJURY
COULD OCCUR.
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
Disconnect and lock out all power before maintenance
or other need to open the equipment. Only qualified
personnel should open and service the control.
OTHERWISE, DEATH OR PERSONAL INJURY
COULD OCCUR.
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
Equipment may still be energized even if unplugged!
When making adjustments or performing checkout
procedures, stay clear of any moving mechanical parts
and do not touch exposed electrical equipment or
electrical connectors. OTHERWISE, DEATH OR
PERSONAL INJURY COULD OCCUR.
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
Disconnect/disable all mechanical and/or electrical
devices that send activation signals to the gun(s),
valve(s), melter pump(s), etc. This includes pattern
controls, timers, input/output signals, etc. Only qualified
personnel should open and service the control.
OTHERWISE, DEATH OR PERSONAL INJURY
COULD OCCUR.
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
Disable all triggering devices, relieve all residual
pressure (hydraulic and air) and allow adhesive to cool
before attempting to disconnect guns, hoses, valves,
etc. Only qualified personnel should open and service
the control. OTHERWISE, DEATH OR PERSONAL
INJURY COULD OCCUR.
WARNING!
WARNING!
WARNING!
WARNING!
WARNING!
Never point an adhesive dispensing gun, valve, hose, air
hose, or anything else at yourself or another person.
OTHERWISE, DEATH OR PERSONAL INJURY
COULD OCCUR.
Summary of Contents for D-90
