VALCO MELTON D-90, Manual

Page: 139 / 150

11-1 ValcoMelton
SECTION 11 - WARRANTY SECTION 11 - WARRANTY
SECTION 11 - WARRANTY SECTION 11 - WARRANTY SECTION 11 - WARRANTY
Cold Glue Equipment
and Electronic
Controls
Warranty
Information
Hot Melt Units,
Hoses, Valves, Guns,
and Related
Equipment
Valco Cincinnati, Inc. warrants its equipment worldwide against defects in
material and workmanship as outlined in this section.
Liability of the company is limited to repair of the product, or replacement of
any part shown to be defective, and does not extend to defects caused by
accidents, misuse, abuse, neglect, tampering or deterioration by corrosion.
This warranty does not cover those items determined by Valco Cincinnati,
Inc. to be normal wear items such as seals, O-rings, diaphragms, springs,
etc.
Reconditioned equipment, unless specified otherwise at the time of purchase,
will be warranted as described above for a period of ninety (90) days from the
date of shipment by Valco Cincinnati.
Components purchased by Valco Cincinnati, Inc. from others for inclusion in
its products are warranted only to the extent of the original manufacturer’s
warranty. In no event shall Valco Cincinnati, Inc. be liable for indirect or
consequential damages arising out of the use of Valco Cincinnati products.
This warranty is conditioned upon the prepaid return of the equipment
claimed to be defective to Valco Cincinnati, Inc. for examination and
verification. If claimed defect is verified, repairs or replacements will be made
F.O.B. Cincinnati, Ohio, U.S.A. or ex-works Telford, U.K. If the inspection of
the equipment does
not not not not not disclose any defect of workmanship or material, any
necessary repairs will be made at a reasonable charge and return
transportation will be charged.
This is the only authorized Valco Cincinnati, Inc. warranty and is in lieu of all
other expressed or implied warranties, representations or any other
obligations on the part of Valco Cincinnati, Inc.
The warranty for cold glue equipment and electronic controls for a period of
one (1) year from the date of shipment by Valco Cincinnati, Inc.
All hot melt components except cast-in heating elements are warranted for a
period of six (6) months from the date of shipment by Valco Cincinnati. Cast-
in heaters carry an additional, pro-rated warranty not to exceed three (3)
years from the date of shipment by ValcoMelton, a Valco Cincinnati, Inc.
company.