P/N CWSI-IM-C3K6 Rev. F
© 2017 Johnson Controls. All rights reserved. All specifications and other information shown were current as of document revision
date and are subject to change without notice.
56
must be programmed to perform any of these functions. Follow local fire codes and AHJ
instruction when using this button.
Detector sounder silence
The operation of this button is similar to the Alarm Ack button except it will not scroll through multiple
priority acknowledged Alarms. Use the Alarm Ack button for this function. The intended use of this
button is to silence Model 301 tandem smoke detector sounders but the Detector sounder silence
button can also be programmed to reset any active NAC circuits and Model RB 10-40 relays. The
Signals Silenced LED will turn on and the message “Detector Sounders Silenced “will appear on the
LCD when this button is pressed while an alarm is present. Pressing this button will also send a record
to the button press log.
The Detector sounder silence button must be programmed to perform any
of these functions.
Follow local fire codes and AHJ instruction when using this button.
Strobe Reset
The operation of this button is similar to the Alarm Ack button except it will not scroll through multiple
priority acknowledged Alarms. Use the Alarm Ack button for this function. The intended use of this
button is to reset NAC’s that are controlling strobes. This button can also be programmed to reset any
active NAC circuits and Model RB 10-40 relays. The Signals Silenced LED will turn on and the message
Strobes Reset “will appear on the LCD when this button is pressed while an alarm is present. Pressing
this button will also send a record to the button press log.
The Strobe Reset button must be
programmed to perform any of these functions.
Follow local fire codes and AHJ instruction
when using this button.
Reset
Pressing this button will reset the CP-3600(+) system to normal standby operation. All active LED’s,
NAC circuits, Dry contact relays, Auxiliary output, RB 10-40 relays, LCD display and piezo will be
restored to normal standby condition. If the system is in test mode, pressing the reset button will take
the CP-3600(+) out of test mode. If any Alarm, Supervisory or Trouble that exists after reset will cause
the system to once again annunciate that condition.
Panel Test
Pressing this button while the CP-3600(+) is in normal standby will activate the Test LED. Refer to the
system testing section for additional information. Pressing reset will return the system to normal
standby.
Horns On
When pressed, this button will activate any NAC circuits and/or Model 301 sounders, turn the piezo on
steady and the words “Alarm Circuits Activated will appear on the LCD screen. Pressing this button will
also send a record to the button press log.
The Horns On button must be programmed to perform
these functions. Refer to programming section for options.
Enter
This button is used for system programming. Refer to programming section.
Back
This button is used for system programming. Refer to programming section.
Up, Down, Left, Right
These buttons are used for system programming and LCD display navigation.
4 Soft arrow keys
These buttons provide access to the menus used for configuration, programming, memory logs and
system info. They also provide other functions where necessary. The user may be prompted to enter