Triumph Adler CLP 4550, Instruction Handbook Manual

Page: 81 / 236

Using the Operation Panel 4-25
Paper Output (Output location selection)
Select the output location. For details, refer to Paper Output (Selecting
the Paper Output Location) on page 4-58 .
1
In the Copies menu or the Paper Selection menu, press
[Function]
( [Right Select] ). The
Function
menu appears.
2
Press U or V to select
Paper Output
.
3
Press [OK] . The
Paper Output
menu appears showing the
available output locations.
4
Press U or V to select the desired output location.
5
Press [OK] . The selected output location is stored and the
Function
menu reappears.
Duplex (Setting the duplex printing)
Set duplex printing. For details, refer to Duplex (Setting the duplex
printing) on page 4-57 .
1
In the Copies menu or the Paper Selection menu, press
[Function]
( [Right Select] ). The
Function
menu appears.
2
Press
U
or
V
to select
Duplex
.
3
Press [OK] . The
Duplex
screen appears showing the list of
available duplex printing modes.
4
Press U or V to select the desired duplex printing mode.
The message display toggles through the following:
Off
(default)
Bind Long Edge
Bind Short Edge
Selecting
Off
disables duplex printing.
Note
The screen varies depending on the installed options.
Function: a b
1
Paper Output
2
Duplex
3 Del. after Print
Paper Output: a b
1
*TopTray FaceDown
2
Tray A Face Down
3 Tray B Face UP
Note The screen shown appears when a 3,000 Sheet Document
Finisher is installed.
Function:
a b
1
Paper Output
2 Duplex
3 Del. after Print
Duplex: a b
1
*Off
2
Bind Long Edge
3 Bind Short Edge