manualshive.com logo in svg

Triumph Adler CLP 4550, Instruction Handbook Manual

Share
Download
Triumph Adler CLP 4550 Instruction Handbook Manual Download Page 171

Using the Operation Panel 

4-115

Network Status (Printing the network status page)

The network status page contains detailed information on the network 
settings.  This is primarily used for maintenance by service personnel, but 
it contains information that may also be useful to you.

1

In the Service Setting menu, press 

U

 or 

V

 to select 

Network 

Status

.

2

Press 

[OK]

. A confirmation screen appears.

If Job Accounting is enabled, a confirmation screen appears after 
department login.
Press 

[Yes]

 (

[Left Select]

). 

Accepted.

 appears and printing 

begins.
Pressing 

[No]

 (

[Right Select]

) returns you to the Service Setting 

menu screen without printing the service status page. 

Test Page (Printing the test page)

The test page is printed to check the effectiveness of printer adjustments. 
This is primarily used for maintenance by service personnel, but it 
contains information that may also be useful to you.

1

In the Service Setting menu, press 

U

 or 

V

 to select 

Test Page

.

2

Press 

[OK]

. A confirmation screen appears.

If Job Accounting is enabled, a confirmation screen appears after 
department login.
Press 

[Yes]

 (

[Left Select]

). 

Accepted.

 appears and printing 

begins.
Pressing 

[No]

 (

[Right Select]

) returns you to the Service Setting 

menu screen without printing the service status page. 

DEV-CLN (Developer/Refresh mode setting)

This sets the refresh mode for the developer. When the printing quality 
declines, refreshing the developer can restore the printing quality. This is 
primarily used for maintenance by service personnel.

1

In the Service Setting menu, press 

U

 or 

V

 to select 

DEV-CLN

.

2

Press 

[OK]

. A confirmation screen appears.

Press 

[Yes]

 (

[Left Select]

). The developer is refreshed.

Pressing 

[No]

 (

[Right Select]

) returns you to the Service Setting 

menu screen without refreshing the developer.

Print.
Are you sure?

z

 Network Status

[

Yes

] [

No ]

Print.
Are you sure?

z

 Test Page

[

Yes

] [

No ]

DEV-CLN
Are you sure?

[

Yes

] [

No ]

Summary of Contents for CLP 4550













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands