Using the Operation Panel
4-67
DHCP (DHCP setting)
DHCP (Dynamic Host Configuration Protocol) is the protocol that assigns
the information required to establish a network connection when a host
attempts to connect to the network (Internet). This information includes
the IP address of the local node and the default router (the router in the
host's own network system) and the DNS (Domain Name System) server.
DHCP is an extension of the BOOTP (Bootstrap) startup protocol.
1
In the IPv4 Setting menu, press
U
or
V
to select
DHCP
.
2
Press
[OK]
. The
DHCP
screen appears.
3
Press
U
or
V
to select whether DHCP is enabled.
4
Press
[OK]
. The DHCP setting is set and the IPv4 Setting menu
reappears.
Auto-IP (Auto-IP setting)
This protocol is used for automatic assignment of an IP address when you
connect to a small network that does not have a DHCP server. Select an
address from the range 169.254.0.1 to 169.254.255.254, and if no other
device on the network is using that address, it is used as your address.
1
In the IPv4 Setting menu, press
U
or
V
to select
Auto-IP
.
2
Press
[OK]
. The
Auto-IP
screen appears.
3
Press
U
or
V
to select whether Auto-IP is enabled.
4
Press
[OK]
. The Auto-IP setting is set and the IPv4 Setting menu
reappears.
IP Address (IP address setting)
An IP address is the address of a network device such as a computer and
is included in IP packets as needed for the sending and receiving of
Internet data (IP packets). (IP addresses can be either destination
addresses or source addresses.)
Specifically, an IP address is a bit string consisting of a host address (or
host section) that identifies a computer (host) connected to the Internet
and a network address (or network section) that identifies the network to
which that computer belongs (or more specifically, the computer's
network interface). Bit strings (IP addresses) that are unique throughout
the entire Internet system are allocated to each computer or interface.
DHCP:
a
b
1
Off
2
*On
Auto-IP:
a
b
1
Off
2
*On
Summary of Contents for CLP 4550
