manualshive.com logo in svg

Triumph Adler CLP 4550, Instruction Handbook Manual

Share
Download
Triumph Adler CLP 4550 Instruction Handbook Manual Download Page 53

Handling Paper 

3-13

Loading Paper

The following explains the procedure for loading paper in the cassette 
and the MP tray.

Loading Paper into the Cassette

1

Fan the media (paper/transparencies), then tap it on a level surface 
to avoid media jams or skewed printing.

2

Pull the paper cassette out toward you until it stops.

3

Adjust the paper length guide to the length of the paper.

When loading A4 or smaller paper into paper cassette 1, raise the 
paper length guide. For B4 or larger paper, lower the paper length 
guide.

4

Grasp the paper width adjustment knob and adjust the paper width 
guides to the width of the paper.

Note  

Do not pull out more than one paper cassette at a time.

Summary of Contents for CLP 4550













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands