manualshive.com logo in svg

Triumph Adler CLP 4550, Instruction Handbook Manual

Share
Download
Triumph Adler CLP 4550 Instruction Handbook Manual Download Page 56

3-16

Handling Paper 

5

Insert the paper along the paper width guides into the tray until it 
stops.

IMPORTANT  

Make sure that the side that was closest to the package 

seal is facing up.
Curled paper must be straightened before use.
Straighten the top edge if it is curled.
Before loading paper in the MP tray, make sure no paper remains in 
the tray from a previous job. If a small amount of paper remains in the 
MP tray and you want to add more, remove the remaining paper from 
the tray, combine it with the new paper, fan the paper, and then load 
in the tray.

6

Set the MP tray paper size on the printer’s operation panel. Refer to 

Paper Settings on page 4-46

.

Paper stopper

When using A3 or Ledger paper, open the paper stopper.

Correct

Incorrect

Summary of Contents for CLP 4550













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands