manualshive.com logo in svg

Triumph Adler CLP 4550, Instruction Handbook Manual

Share
Download
Triumph Adler CLP 4550 Instruction Handbook Manual Download Page 14

xiv

 

Canadian Department of Communications Compliance 
Statement

This Class B digital apparatus complies with Canadian ICES-003.

Avis de conformité aux normes du ministère des 
Communications du Canada 

Cet appareil numérique de la classe B est conforme à la norme NMB-003 
du Canada.

EN ISO 7779

Maschinenlärminformations-Verordnung 3. GPSGV, 06.01.2004: Der 
höchste Schalldruckpegel beträgt 70 dB (A) oder weniger gemäß EN ISO 
7779.

Ergonomics

Das Gerät ist nicht für die Benutzung am Bildschirmarbeitsplatz gemäß 
BildscharbV vorgesehen.

Disclaimer

TA Triumph-Adler/

UTAX GmbH

 will not be liable to customers or any other 

person or entity f

or any loss or damage caused or alleged to be caused directly or 

indirectly by equipment sold or furnished by us, including but not limited 
to, any interruption of service, loss of business or anticipatory profits, or 
consequential damages resulting from the use or operation of the 
equipment or software.

Laser Safety

Laser radiation could be hazardous to the human body. For this reason, 
laser radiation emitted inside this machine is hermetically sealed within 
the protective housing and external cover. In the normal operation of the 
product by user, no radiation can leak from the machine.

This machine is classified as Class 1 laser product under IEC 60825.

Caution:

 Performance of procedures other than those specified in this 

manual may result in hazardous radiation exposure.

These labels are attached to the laser scanner unit inside the machine 
and are not in a user access area.

The label shown below is attached on the right side of the machine.

Summary of Contents for CLP 4550













































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands