manualshive.com logo in svg

TriCoder Portable Bar Code Reader, Owner'S Manual

Introducing the TriCoder Portable Bar Code Reader, a powerful device that revolutionizes barcode scanning. Simplify your business operations with this user-friendly tool, designed to enhance efficiency and accuracy. Ensure seamless usage by downloading the free Owner's Manual from manualshive.com, providing comprehensive instructions and insightful tips for optimal performance.

Share
Download
background image

 

E-6

TriCoder Cases and Holsters 

The TriCoder has a variety of carrying cases and holsters available for use, 
depending upon the configuration and function of your TriCoder.  Choosing 
the correct carrying case or holster can increase productivity by making the 
TriCoder more accessible and portable. 

The TriCoder can use the following carrying cases and holsters: 

F41  Leather Carrying Case for Booted TriCoder 

The F41 Leather Carrying Case features either a 
shoulder strap or belt loop attachment,  a convenient 
holster-style wand holder, and a vinyl cover over the 
keys.  The TriCoder is worn upside down to make it 
easier for the operator to simply lift the TriCoder up 
and view the display and 
keypad in the correct 
orientation.  The case has 
openings for all cable and 

scanner attachments, making it unnecessary to 
remove the case for uploading. This case has 
open access to the TriCoder keypad but is also 
available with a clear plastic keypad window to 
protect the TriCoder keypad from the elements. 

 

B12 Rubber Boot for TriCoder 

The B12 Rubber Boot is for use only with all 
models of the TriCoder.  The B12 is a rugged, 
protective rubber boot intended to protect the 
TriCoder in the most hostile environments.  The 
B12 is included with at no cost with all TriCoder 
orders. 

 

 

T46 Holster for LT model TriCoder with B12 Rubber Boot 

The T46 holster was designed with 
ample room in order to accommodate 
the LT TriCoder while encased in the 
B12Rubber Boot.  The holster is worn 
on the belt and gives the operator a 
convenient place to store and carry 
their TriCoder during use. 

 

 

Summary of Contents for Portable Bar Code Reader






















































































































































































































































Reviews:

No comments

Related manuals for Portable Bar Code Reader

SanDisk ImageMate SDDR-89 User Manual preview
ImageMate SDDR-89
Brand: SanDisk Pages: 8
Ingenico RP457c Quick Start Manual preview
RP457c
Brand: Ingenico Pages: 4
AEG ID ARE H9 BLE Manual preview
ID ARE H9 BLE
Brand: AEG Pages: 17
Kyungwoo A230 User Manual preview
A230
Brand: Kyungwoo Pages: 7
Intuit QB21 Quick Start Manual preview
QB21
Brand: Intuit Pages: 2
Nordic ID HH8 Series User Manual preview
HH8 Series
Brand: Nordic ID Pages: 38
Nordic ID RF601 User Manual preview
RF601
Brand: Nordic ID Pages: 45
Godex EZ2250i User Manual preview
EZ2250i
Brand: Godex Pages: 67
Rosslare Mifare AS-B01 Hardware And Software Manual preview
Mifare AS-B01
Brand: Rosslare Pages: 50
Datalogic Heron D130 Quick Reference preview
Heron D130
Brand: Datalogic Pages: 22
Datalogic HandScanner MR User Manual preview
HandScanner MR
Brand: Datalogic Pages: 25
Datalogic DLL5100 Series Quick Reference preview
DLL5100 Series
Brand: Datalogic Pages: 16
ICO CCD-800 Manual preview
CCD-800
Brand: ICO Pages: 48
Videx MINI - MF User Manual preview
MINI - MF
Brand: Videx Pages: 2
Manhattan 172844 User Manual preview
172844
Brand: Manhattan Pages: 14
Nortech PP1 Installation Manual preview
PP1
Brand: Nortech Pages: 4
Symbol PSM20i Attachment Owner'S Manual preview
PSM20i
Brand: Symbol Pages: 17
Balluff BVS HS-QC Quick Manual preview
BVS HS-QC
Brand: Balluff Pages: 44

Brands by name

Popular brands

Load more brands