13-8
6. Transmit only the voice messages by pressing the 9 key. The
TriCoder will display:
SENDING PROGRAM
PLEASE WAIT_
The voice messages will play as they are transmitted. If you do
not hear the correct messages or you hear no messages at all,
you may have transmitted from the wrong TriCoder.
7. When the voice messages have been successfully transmitted
and received, the TriCoders will display these messages:
END OF PGM. XMIT
HIT ANY KEY
and
END OF PGM. RECV
HIT ANY KEY
Pressing any key takes you back to the MODE MENU. If an
error occurs (or you press any of the keys on the TriCoder)
during the transfer, the TriCoder will display the following
error message:
DATA XMIT ERROR
CYCLE POWER
If you get the DATA XMIT ERROR message, you have to
restart the whole cloning procedure.
