manualshive.com logo in svg

TriCoder Portable Bar Code Reader, Owner'S Manual

Share
Download
TriCoder Portable Bar Code Reader Owner'S Manual Download Page 190

 

E-4

Laser Accessories 

H11 Laser Holder 

The H11 Laser Holder is for the LZ300 and LZ400 laser scanners.  
 
The H11 Laser Holder can be mounted vertically (wall) or horizontally 
(table top).  
 
You can use wood or metal screws (not provided) to mount the holder. 
 
 
 
 

 

 

 

 

 

 

 

 

 

 

 

CCD Scanners 

LI50 Worth Data Long Range CCD Scanner 

This CCD Scanner reads typical UPC codes from a .5” to 7” distance. It 
acts just like a laser scanner, except the beam is fuzzier than the lasers sharp 
line across the bar code. The cable is rated for 1,000,000 bends and is very 
durable. The warranty is 2 years.   

S10/S20 and S11/S21 Hands Free CCD/Laser Stands 

There is a stand available for use with the LZ300 and LZ400 laser scanners 
(S11/S21) as well as a stand for the LI50 CCD Scanner (S10/S20). The 
stands are available as a mountable “goose neck” (S10 or S11) or in a free-
standing version with a weighted base (S20 or S21). Either stand allows for 
hands free scanning of bar codes but is only for use in Non-Portable Mode 
and requires the TriCoder’s use of the 5 volt power adapter.  To use the 
stand, simply scan the “Stand on/off” bar code on the base to turn on the 
automatic reading mode, then place the scanner in the stand.  When a bar 

Summary of Contents for Portable Bar Code Reader






















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands