7-5
4. At
the
DATA UPLOAD
prompt on the TriCoder, press YES.
5. When the data is finished uploading, TriCoder Utilities will let you
know it is finished. The TriCoder will display the message
END OF TRANSMIT,
DEL FILE Y/N?_
We suggest before you delete the data file from the TriCoder that
you open the data file in Notepad to confirm the upload. If all is
correct, you can press YES to delete the data file from the
TriCoder. If your upload is not correct, press NO and try your
upload again.
Program Files
1. On the TriCoder, press NO until you see the prompt
PROGRAM TRANSMIT
KEY [YES/NO]?_
then press YES.
2. In the TriCoder Utilities, choose Program as the File type, then
specify the name of the file (we suggest the extension .pgm for
program files)
3. Click
the
START button in the TriCoder Utilities.
4. On the TriCoder, press the number of the program you want to
upload at the
TRANSMIT PROGRAM KEY
prompt. Remember
that you cannot transmit program 0, you must choose 1, 2 or 3.
Pressing 0 will clone your TriCoder.
5. TriCoder Utilities will let you know when your transmission is
finished. The TriCoder will display the message
END OF PGM,XMIT
HIT ANY KEY_
Cloning the TriCoder
1. On the TriCoder, press NO until you see the prompt
PROGRAM TRANSMIT
KEY [YES/NO]?_
then press YES.
2. In the TriCoder Utilities, choose Clone TriCoder as the File type,
then specify the name of the file (we recommend using the
extension .cln for clone files)
3. Click
the
START button in the TriCoder Utilities.
