13-3
Accessing Voice Message Operations
Voice Operations are accessed two ways. The first way is the usual access
from the Programming Mode menu. The second way is “hotkey” access
when you are creating a program or assigning errors messages
From the Programming Mode menu…
Enter the Programming Mode by answering “NO” to all Operation Mode
prompts until you get to:
PROGRAMMING MODE
KEY [YES/NO]?
Press “YES”. The TriCoder then asks for a password. Key in the password
WDTRI (this is the same password discussed previously in this manual).
Entering the correct password produces the following prompt:
Create Programs->1- 3
Voice
-> 4 Setup -> 5
Automation ---
----->
7
Data File Names-->
6
Press the “4” key to select Voice Operations. The next prompt displayed is:
VOICE OPERATIONS KEY
Record/Playback->1
Assign Errors----->2
Pressing the “1” key takes you into the voice recording and playback
function. Pressing the “2” key allows you to assign voice message numbers
to error conditions.
Using the "hotkey"…
The other way to get into the voice recording and playback function is by
using a “hotkey” sequence. If you are in “
PROGRAMMING
MODE
” and
have chosen “Create Programs”, press the
SHIFT
key, then the
F1
key,
and then the
F2
key. This key combination will take you to the
“Record/Playback” function. This same “hotkey” sequence of
SHIFT F1
F2
will work if you are in the “Assign Errors” function and want to record
or playback a message. Pressing
F1
while in the “Record/Playback”
function will take you back to the program or error message you were
working on.
