Treaton MV200, User Manual

Page: 33 / 222

3.3 Preparing for operation
3-5
Secure the electronic unit to the cart with the supplied butterfly nut and additional attachments on
the other side (figure 3.2).
Figure 3.2 - Securing the electronic unit on the transport cart
Make sure that the ventilator is properly fixed on the cart in three points to
prevent injuries of the patient caused by falling of electronic unit from the
cart.
After preparing the device for use, lock the cart wheels to prevent injuries of
the patient and personnel, and damage of the device.
•
Install the supplied supporting arm (the circuit holder) on either side of the cart according to
Figure 3.3. Place breathing circuit on the supporting arm in a form convenient for use.
Figure 3.3 – Installation of the supporting arm (circuit holder)
•
The arm is equipped with self-locking buttons (see Figure 3.4) for changing the seg-
ments position. For the arm folding, press and hold the button to unlock the segment,
select the desired segment position, then release the button to lock it. It is not neces-
sary to press the button for the arm lifting, just pull the segment upward.