2
TRAK Machine Tools
Southwestern Industries, Inc.
32240 - Printer and MMS - Installation & Printing Guide
1.0
Safety Specifications
The safe operation of the TRAK 3ntr 3D printer and MMS depends on its proper use and the precautions
taken by each operator.
•
Read and study the TRAK 3ntr 3D printer and MMS manuals. Be certain that every operator
understands the operation and safety requirements of this machine
before
its use.
1.1
Safety Publications
Please note that FFF/FDM 3D printing can produce hazardous Ultra-
Fine Particles (UFP’s) and Volatile
Organic Compounds (VOCs). Our 3ntr printers come with a HEPA Filter and enclosed print chamber to
help reduce the amount of UFP and VOC’s you
come in contact with. Always close the print chamber door
and turn on the HEPA Filter while printing.
1.2
Safety Labels & Notices as Used in this Manual
•
DANGER -
Immediate hazards that will result in severe personal injury or death.
•
WARNING -
Hazards or unsafe practices that could result in severe personal injury and/or
damage to the equipment.
•
CAUTION -
Hazards or unsafe practices that could result in minor personal injury or
equipment/product damage.
•
NOTE -
Call attention to specific issues requiring special attention or understanding.
Safety & Information Labels Used on the TRAK 3ntr A2 / A4
It is forbidden by OSHA regulations and by law to deface, destroy or remove any of these labels from
the printers.
Burn Hazard
Hot Surface Hazard
Fire Hazard
Risk of Crush
Crush Hazard
Pinch Hazard
Electromagnetic Interference
Hazard
Electrocution Hazard
Toxic Fumes Hazard
