TRAK 3ntr Series Installation & Printing Manual Download Page 44

Page: 44 / 98

TRAK Machine Tools

Southwestern Industries, Inc.

32240 - Printer and MMS - Installation & Printing Guide

Spool Holder Bracket

•

Holds the Spool and Spool Holder.

Heater

•

The MMS has a built-in heater that helps
maintain the temperature (up to 35°C)

inside the MMS. It also helps keep
materials dry and printing at their best.

LED Lights

•

Provides lighting within the cabinet.

Filament Feeder Guides

•

The Filament Feeder Guides are fed

through the MMS, and they help protect
the filament traveling from the MMS to
the printer safe from moisture, dust, oil

and physical damage.

4.6.2

Installing Desiccant Cannister Holders

Two desiccant cannisters are provided to you for your MMS, in order to manage the humidity within the

cabinet.

Step

Image

Hang one desiccant cylinder tray inside
the front door on the front of the scale

structure as shown in image to the right.

The second desiccant cylinder is intended

to be rotated with the first so that one
can be dried while the second is keeping

the humidity within the MMS under
control.

Summary of Contents for 3ntr Series



































































































Search results

Summary of Contents for 3ntr Series

Reviews:

Related manuals for 3ntr Series

Brands by name

Popular brands

TRAK 3ntr Series, Installation & Printing Manual

Search results

Summary of Contents for 3ntr Series

Reviews:

Related manuals for 3ntr Series

Brands by name

Popular brands