16
TRAK Machine Tools
Southwestern Industries, Inc.
32240 - Printer and MMS - Installation & Printing Guide
4.3
A2/A4 3ntr 3D Printers
Once you are satisfied with the placement of your printer/MMS, and have made sure everything in your
packing list has been received, it’s time to go over setting up the printer, print server and MMS, if
applicable.
In the upcoming sections, there will be parts that might not apply to you depending on whether you
purchased an MMS, or not.
The green sections are required to read regardless of what you ordered. The blue and orange depend on
what you ordered.
See diagram below to understand what sections apply to you, and in what order you should read them.
4.3.1
Orientation, Controls & Functions
Whether you purchased an A2 or an A4, everything is almost the same, with the exception of a few key
differences like printer size, printer build volume and power supply. For demonstration purposes, we will
reference an A2 in the following section.
