TRAK 3ntr Series Installation & Printing Manual Download Page 81

Page: 81 / 98

TRAK Machine Tools

Southwestern Industries, Inc.

32240 - Printer and MMS - Installation & Printing Guide

NOTE

–

No Filament should be loaded onto the printer at this time. If there is, complete the Unloading

Filament procedure first.

NOTE

–

If you have an MMS

–

Avoid feeding the Cleaning nylon through the Filament Feeder Guides for

easier loading and unloading of the cleaning nylon.

At the back of the Printer

Push the Feeder Handle down (to disengage

the Feeder Mechanism)

You may use the Locking Tab to lock the

Feeder Mechanism in the pushed down

position.

Trim off several millimeters off the Filament
Tip at an angle to point the tip and remove

any damage.

Feed the Cleaning Nylon through the Feeder

Unit until it reaches the Extruder.

Release the Feeder Handle (to engage the
Feeder Mechanism).

If you used the Locking Tab, release the tab

to release the Feeder Handle.

From the LCD:

Before changing filament, always check that
there is enough clearance (about 50mm)
between the nozzle and the build plate
before starting.

Summary of Contents for 3ntr Series



































































































Search results

Summary of Contents for 3ntr Series

Reviews:

Related manuals for 3ntr Series

Brands by name

Popular brands

TRAK 3ntr Series, Installation & Printing Manual

Search results

Summary of Contents for 3ntr Series

Reviews:

Related manuals for 3ntr Series

Brands by name

Popular brands