61
TRAK Machine Tools
Southwestern Industries, Inc.
32240 - Printer and MMS - Installation & Printing Guide
Step
Image
1.
Print Server’s IP Address
NOTE -
To access the MMS Dashboard,
enter the print server’s IP address followed
by :3000, for example:
100.1.100.85:3000.
2.
Diagram of the nozzle from the back of the
printer.
3.
Diagram of the Spool Holder Brackets from
the view from the back of the printer.
4.
Dash Button
Takes you to your MMS Dashboard, to
data entry mode to add materials, set
spool sizes and store nozzle configuration
information.
5.
Unit Settings
You can select the unit preference for
Weight, Length, Diameter and
Temperature
6.
Unit Name
You can change the name of the printer
7.
Relative Humidity
Give you the current cabinet humidity
percentage for the MMS
8.
Box Temperature
Gives you the current cabinet temperature
for the MMS
9.
Nozzle Configuration
Gives you a summary of the three nozzle
configurations, so you know the Nozzle
Diameter and Material Diameter.
10.
Reel Configuration
Gives you the current material information
for each spool stored in the MMS,
including the extruder it is loaded onto,
the material type, diameter, reel weight,
live weight and remaining filament.
NOTE
- Remaining filament on each spool
is calculated by using the empty weight of
the spool along with the live weight and
material information entered for that
spool. The server keeps a running average
of the empty spool weight, so if you know
an empty spool weight has changed enter
it into the field for the spool, otherwise no
entry will use the default average empty
spool weight for that spool size.