TRAK 3ntr Series Installation & Printing Manual Download Page 88

Page: 88 / 98

TRAK Machine Tools

Southwestern Industries, Inc.

32240 - Printer and MMS - Installation & Printing Guide

Calibration Prints

NOTE

- We recommend running the following two calibration prints after every nozzle change, in order

to check that the printer is calibrated and ready to print:

•

Z-Offset Calibration Print

•

XY Calibration Print

In order to run the two calibration prints, you

will need to load ABS or ASA into all 3
nozzles.

Load the material now, before moving onto
the next step.

NOTE

- We recommend loading 3 highly

contrasting colors in order to be able to see
the calibration prints clearer.

For example, in Extruder 1, load black, white
or grey. And in extruder 2 and 3, load
different, contrasting colors.

To complete the Z Offset Calibration Print:

From the LCD, go to:

Prepare > Software Tools > A2

(depending on what machine you have) >

Service > Z_Offset_Ext1.gcode

Main Menu

Prepare Menu

Software Tools

A4 Folder

Service Folder

The Z offset calibration print takes
approximately 20 minutes to print, and
should look similar to the image on the right.

Summary of Contents for 3ntr Series



































































































Search results

Summary of Contents for 3ntr Series

Reviews:

TRAK 3ntr Series, Installation & Printing Manual, Page: 88 / 98

Search results

Summary of Contents for 3ntr Series

Reviews: