82
TRAK Machine Tools
Southwestern Industries, Inc.
32240 - Printer and MMS - Installation & Printing Guide
3.
Disconnect the Pin Head Connector.
4.
Remove the Bowden Tubes from the Tube
Adapter.
To do so, use the #8 wrench provided to
you, to push down on the
“push to connect
fittings”
in order to release the Bowden
tube.
NOTE
–
Never pull on or twist a Bowden
tube that is still connected to the Tube
Adapter. Doing so could result in breaking
the
“push to connect fittings”
on the Tube
Adapter, requiring a new Tube Adapter to
be purchased.
5.
Remove the screws on the Adapter Bracket,
highlighted as item #1 on the image to the
right.
6.
Remove the Adapter Bracket, highlighted as
item #1 on the image to the right.
(This will provide you with access to the
Tube Adapters, labeled as item #2 on the
image to the right).
7.
Loosen only the screws for only the nozzles
that need adjustment, labeled as item #3
on the image to the right.
8.
Once the screws are loose, you may tighten
or loosen the Tube Adapter by turning it,
using the tube adapter wrench provided to
you.
Tighten the adapter bracket to move the
nozzle up, and loosen the Adapter Bracket
to move the nozzle down.
NOTE
–
You may need to push down on
the Tube Adapter.
