69
TRAK Machine Tools
Southwestern Industries, Inc.
32240 - Printer and MMS - Installation & Printing Guide
7.
Feed the Filament into the Feeder Unit
until it reaches the Extruder.
Upon initial insertion, there may be slight
resistance, push past this and keep going
until you reach the Extruder.
8.
Release the Feeder Handle (to engage the
Feeder Mechanism).
If you used the Locking Tab, release the
tab to release the Feeder Handle.
On the LCD Screen:
9.
Before loading filament, always check that
there is enough clearance (about 50mm)
between the nozzle and the build plate.
10.
Press the black Jog Wheel button to go to
the Main Menu.
11.
Then go to:
Prepare Menu > Purge
Filament
Main Menu
Prepare Menu
12.
Select the nozzle that you want to purge
(the nozzle you loaded filament into)
Purge Filament Menu
13.
The Status Line will display “Heating…
”
as
the printer heats the selected nozzle to
245⁰C.
Status Line
14.
The Status Line will display “Purging #_”
as it purges some filament.
Status Line
15.
The Status Line will display “Purge #_
Completed”, once the purge is complete.
Status Line
