TRAK 3ntr Series Installation & Printing Manual Download Page 70

Page: 70 / 98

TRAK Machine Tools

Southwestern Industries, Inc.

32240 - Printer and MMS - Installation & Printing Guide

19.

Release the Feeder Handle (to engage the

Feeder Mechanism).

If you used the Locking Tab, release the tab

to release the Feeder Handle.

From the LCD:

20.

Press the black Jog Wheel Button

21.

The Status Line will display “

Priming #_

”,

when the machine begins to prime the
nozzle.

Status Line

22.

The Status Line will display “

Change #_

completed

”, once the priming is complete.

Status Line

23.

Verify the filament was purged. If not,

purge the filament again.

24.

Remove the purged filament from the inside
of the printer.

25.

You have successfully changed the filament.

5.2.1.2

Unloading Filament

From the LCD:

Images

Before unloading filament, always check
that there is enough clearance (about

50mm) between the nozzle and the build
plate.

Press the black Jog Wheel button to go to
the Main Menu.

Then go to:

Prepare Menu

Unload

Filament

Main Menu

Prepare Menu

Summary of Contents for 3ntr Series



































































































Search results

Summary of Contents for 3ntr Series

Reviews:

Related manuals for 3ntr Series

Brands by name

Popular brands

TRAK 3ntr Series, Installation & Printing Manual

Search results

Summary of Contents for 3ntr Series

Reviews:

Related manuals for 3ntr Series

Brands by name

Popular brands