73
TRAK Machine Tools
Southwestern Industries, Inc.
32240 - Printer and MMS - Installation & Printing Guide
6.
The Status Line will display “
Unload #_
Completed
”, once the purge is complete.
Status Line
7.
Remove the purged filament.
Back of the Printer:
8.
Push the Feeder Handle down (to
disengage the Feeder Mechanism)
You may use the Locking Tab to lock the
Feeder Mechanism in the pushed down
position
.
Back of the MMS:
9.
Pull the Filament from the Filament Feeder
Guides rewinding it back on the Spool.
10.
Thread the Filament Tip to the side of the
spool to avoid de-coiling.
11.
Remove the Spool Holder from the Spool
Holder Bracket, and remove the Pin.
12.
Remove the Spool from the Spool Holder.
13.
Replace the Pin, and place the empty
Spool Holder on the Bracket.
Back of the Printer:
14.
Remove the Filament Feeder Guides from
the Feeder Unit and hold them to the back
of the printer with the Magnet Holders.
NOTE
- The Filament Feeder Guides do
not need to be removed from the MMS
every time you unload filament.
15.
You have unloaded your filament!
NOTE -
Cannot leave an extruder without filament, even if you don’t use it. Or else you will encounter
the $ error on the LCD.
