TRAK 3ntr Series Installation & Printing Manual Download Page 76

Page: 76 / 98

TRAK Machine Tools

Southwestern Industries, Inc.

32240 - Printer and MMS - Installation & Printing Guide

From the LCD:

23.

Press the black Jog Wheel Button

24.

The Status Line will display “

Priming #_

”

as it primes the nozzle.

Status Line

25.

The Status Line will display “

Change #_

completed

”, once the priming is

complete.

Status Line

26.

Verify the filament was purged. If not,
purge the filament again.

27.

Remove the purged filament from the
inside of the printer.

28.

You have successfully changed the

filament.

5.2.2.2

Unloading Filament

From the LCD:

Images

Before unloading filament, always check
that there is enough clearance (about

50mm) between the nozzle and the build
plate before starting.

Press the black Jog Wheel button to go to
the Main Menu.

Then go to:

Prepare Menu

Unload

Filament

Main Menu

Prepare Menu

Select the nozzle that you want to unload.

Unload Filament Menu

The Status Line will display “

Heating…”

the printer heats the selected nozzle to

245⁰C.

Status Line

The Status Line will display “

Unloading

” as it purges some filame

nt, and then

retracts the filament.

Status Line

Summary of Contents for 3ntr Series



































































































Search results

Summary of Contents for 3ntr Series

Reviews:

Related manuals for 3ntr Series

Brands by name

Popular brands

TRAK 3ntr Series, Installation & Printing Manual

Search results

Summary of Contents for 3ntr Series

Reviews:

Related manuals for 3ntr Series

Brands by name

Popular brands