![background image](http://html1.mh-extra.com/html/trak/3ntr-series/3ntr-series_installation-and-printing-manual_1148612009.webp)
5
TRAK Machine Tools
Southwestern Industries, Inc.
32240 - Printer and MMS - Installation & Printing Guide
Printer with MMS
Check
Steps
5.
Material Management System (MMS)
a.
Review: Orientation, Controls and Functions
a.
Install Desiccant Cannister Holder
b.
Install Strain Relief Flex Collars & Bowden Tubes
c.
Connect HEPA Filter tube from Printer to MMS
d.
Connect the cables & Power ON
e.
Review: LCD Display Overview
f.
Zero the cabinet
g.
Calibrate the MMS
6.
OnLogic Print Server
a.
Review: Orientation, Controls and Functions
b.
Connect the cables & Power ON
Day 1 (continued...)
–
Training
Check
Steps
1.
Extruder Training
a.
Disassemble Extruder
b.
Change Nozzles
c.
Assemble Extruder
d.
Ensure zero gap between heat bridge and nozzle
e.
Install Extruder Assembly
f.
Torque nozzles
–
i.
Hardened Nozzles - Torque while hot (use Unload Filament function)
g.
Perform Z nozzle height comparison
h.
Install adapter holding bracket
i.
Check extruder gains match the gains value in printer’s Hardware Menu
j.
Auto-home & Check for Z Nozzle Height from the Build plate using feeler
gauge
i.
0.4mm gap (standard for 0.4mm nozzle)
2.
Load Filament
3.
Calibration Prints
a.
Run Z Offset Calibration Print & save offset value
b.
Run XY Calibration Print & save offset value
c.
Print Cube Test (Plate leveling)
–
let cube print start, and move onto the next
steps
4.
Slicer Training
a.
Install Slicer
Write down Product ID’s for SSI / KS in the Additional Comments Section.
b.
Review SSI
–
Easy Mode & slice part
c.
Review KISSlicer
–
Basic Operations & slice parts
(if applicable)
d.
Add G-Code to SD Card or Print Server
5.
Follow Basic Printing Checklist