67
TRAK Machine Tools
Southwestern Industries, Inc.
32240 - Printer and MMS - Installation & Printing Guide
4.
Select the nozzle that you want to unload.
Unload Filament Menu
5.
The Status Line will display “
Heating…”
as
the printer heats the selected nozzle to
245⁰C.
Status Line
6.
The Status Line will display “
Unloading
#_
” as it purges some filament, and then
retracts the filament.
Status Line
7.
The Status Line will display “
Unload #_
Completed
”, once the purge is complete.
Status Line
8.
Remove the purged filament.
Back of the Printer:
9.
Push the Feeder Handle down (to
disengage the Feeder Mechanism)
You may use the Locking Tab to lock the
Feeder Mechanism in the pushed down
position.
10.
Remove the Filament from the Feeder
Unit, rewinding it back on the Spool.
11.
Thread the Filament Tip to the side of the
spool to avoid de-coiling.
12.
Unlock and remove the Locking Collar.
13.
Remove the Spool from the Spool Holder.
14.
Replace the Locking Collar.
15.
You have unloaded your filament!
