User Guide
800
Configuration Example
Figure 6-5
Creating an SNMP User
5) Choose
MAINTENANCE > SNMP > Notification > Notification Config
and click
to load the following page. Choose the IP Mode as IPv4, and specify the IP address of
the NMS host and the port of the host for transmitting notifications. Specify the User as
admin and choose the type as Inform. Set the retry times as 3, with the timeout period
as 100 seconds. Click
Create
.
Figure 6-6
Creating an SNMP Notification Entry
6) Choose
MAINTENANCE > SNMP > Notification > Trap Config
to load the following
page. Enable Storm Control trap and click
Apply
.
Downloaded from
