Managing System
System Info Configurations
User Guide
29
Recurring Mode
If you select
Recurring Mode
, specify a cycle time range for the Daylight Saving
Time of the switch. This configuration will be used every year.
Offset
: Specify the time to set the clock forward by.
Start Time
: Specify the start time of Daylight Saving Time. The interval between
start time and end time should be more than 1 day and less than 1 year(365 days).
End Time
: Specify the end time of Daylight Saving Time. The interval between
start time and end time should be more than 1 day and less than 1 year (365 days).
Date Mode
If you select
Date Mode
, specify an absolute time range for the Daylight Saving
Time of the switch. This configuration will be used only one time.
Offset
: Specify the time to set the clock forward by.
Start Time
: Specify the start time of Daylight Saving Time. The interval between
start time and end time should be more than 1 day and less than 1 year(365 days).
End Time
: Specify the end time of Daylight Saving Time. The interval between
start time and end time should be more than 1 day and less than 1 year (365 days).
3) Click
Apply
.
2.1.5 Configuring LED
(Only for Certain Devices)
Note:
Only TL-SG2210P supports LED On/Off.
Choose the menu
System > LED On/Off
to load the following page. Choose the LED status
and click
Apply
.
Figure 2-8
Configuring LED On/Off
Downloaded from
