Accessing the Switch
Command Line Interface Access
User Guide
11
3.2 Telnet Login
The switch supports Login Local Mode for authentication by default.
Login Local Mode: Username and password are required, which are both admin by default.
The following steps show how to manage the switch via the Login Local Mode:
1) Make sure the switch and the PC are in the same LAN (Local Area Network). Click
Start
and type in
cmd
in the Search bar and press
Enter
.
Figure 3-3
Open the cmd Window
2) Type in
telnet 192.168.0.1
in the cmd window and press
Enter
.
Figure 3-4
Log In to the Switch
3) Type in the login username and password (both
admin
by default). Press
Enter
and you
will enter User EXEC Mode.
Figure 3-5
Enter User EXEC Mode
Note:
The first time you log in, change the password to better protect your network and devices.
Downloaded from
