User Guide
26
Managing System
System Info Configurations
MAC Address
Displays the MAC address of the switch.
System Time
Displays the system time of the switch.
Running Time
Displays the running time of the switch.
Serial Number
Displays the serial number of the switch.
Jumbo Frame
Displays whether Jumbo Frame is enabled. You can click
Settings
to jump to the
Jumbo Frame configuration page.
SNTP
Displays whether the switch gets system time from NTP Server. You can click
Settings
to jump to the System Time configuration page.
IGMP Snooping
Displays whether IGMP Snooping is enabled. You can click
Settings
to jump to the
IGMP Snooping configuration page.
SNMP
Displays whether SNMP is enabled. You can click
Settings
to jump to the SNMP
configuration page.
Spanning Tree
Displays whether Spanning Tree is enabled. You can click
Settings
to jump to the
Spanning Tree configuration page.
DHCP Relay
Displays whether DHCP Relay is enabled. You can click
Settings
to jump to the DHCP
Relay configuration page.
802.1x
Displays whether Jumbo Frame is enabled. You can click
Settings
to jump to the
Jumbo Frame configuration page.
HTTP Server
Displays whether HTTP server is enabled. You can click
Settings
to jump to the HTTP
configuration page.
Telnet
Displays whether Telnet is enabled. You can click
Settings
to jump to the Telnet
configuration page.
SSH
Displays whether SSH is enabled. You can click
Settings
to jump to the SSH
configuration page.
2.1.2 Configuring the Device Description
Choose the menu
SYSTEM
>
System Info
>
Device Description
to load the following
page.
Figure 2-5
Configuring the Device Description
1) In the
Device Description
section, configure the following parameters.
Downloaded from
