Configuring Protocol VLAN
Protocol VLAN Configuration
User Guide
179
Step 5
interface {fastEthernet
port
| range fastEthernet
port-list
| gigabitEthernet
port
| range
gigabitEthernet
port-list
| ten-gigabitEthernet
port
| range ten-gigabitEthernet
port-list
|
port-channel
port-channel-id
| range port-channel
port-channel-list
}
Enter interface configuration mode.
Step 6
protocol-vlan group
entry-id
Add the specified port to the protocol group.
entry-id:
Protocol VLAN index.
Step 7
end
Return to Privileged EXEC Mode.
Step 8
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to bind the IPv6 protocol template to VLAN 10 and add
port 1/0/2 to protocol VLAN:
Switch#configure
Switch(config)#show protocol-vlan template
Index Protocol Name Protocol Type
-------- ------------------ --------------------------------
1 IP EthernetII ether-type 0800
2 ARP EthernetII ether-type 0806
3 RARP EthernetII ether-type 8035
4 IPX SNAP ether-type 8137
5 AT SNAP ether-type 809B
6 IPv6 EthernetII ether-type 86DD
Switch(config)#protocol-vlan vlan
10
priority
5
template
6
Switch(config)#show protocol-vlan vlan
Index
Protocol-Name
VID Priority Member
--------
-------------------- ------ ------ ------
1
IPv6
10 0
Switch(config)#interface gigabitEthernet
1/0/2
Switch(config-if)#protocol-vlan group
1
Switch(config-if)#show protocol-vlan vlan
Downloaded from
