Managing System
System Tools Configurations
User Guide
51
Follow these steps to configure the boot file:
1) In the
Boot Table
section, select one or more units and configure the relevant
parameters.
Unit
Displays the number of the unit.
Current Startup
Image
Displays the current startup image.
Next Startup
Image
Select the next startup image. When the switch is powered on, it will try to start up
with the next startup image. The next startup image and backup image should not
be the same.
Backup Image
Select the backup image. When the switch fails to start up with the next startup
image, it will try to start up with the backup image. The next startup and backup
image should not be the same.
Current Startup
Config
Displays the current startup configuration.
Next Startup
Config
Specify the next startup configuration. When the switch is powered on, it will try
to start up with the next startup configuration. The next startup configuration and
backup configuration should not be the same.
Backup Config
Specify the backup configuration. When the switch fails to start up with the next
startup configuration, it will try to start up with the backup configuration. The next
startup and backup configuration should not be the same.
2) Click
Apply
.
In the
Image Table
, you can view the information of the current startup image, next startup
image and backup image. The displayed information is as follows:
Image Name
Displays the name of the image.
Software
Version
Displays the software version of the image.
Flash Version
Displays the flash version of the image.
Downloaded from
