User Guide
256
Configuring Layer 2 Multicast
Multicast Filtering Configuration
Figure 5-1
Create IPv4 Profile
Follow these steps to create a profile.
1) In the
General Config
section, specify the Profile ID and Mode.
Profile ID
Enter a profile ID between 1 and 999.
Mode
Select
Permit
or
Deny
as the filtering mode.
Permit
: Acts as a whitelist and only allows specific member ports to join specified
multicast groups.
Deny
: Acts as a blacklist and prevents specific member ports from joining specific
multicast groups.
2) In the
IP-Range
section, click
to load the following page. Configure the start IP
address and end IP address of the multicast groups to be filtered, and click
Create
.
Downloaded from
