User Guide
46
Managing System
User Management Configurations
Follow these steps to configure Enable Password:
1) Select
Set Password
and specify the enable password in the
Password
field. It should
be a string with 31 characters at most, which can contain only English letters (case
sensitive) digits and 17 kinds of special characters. The special characters are
!$%’()*,-
./[]_{|}
.
2) Click
Apply
.
Tips:
The logged-in users can enter the Enable Password on this page to get the administrative
privileges.
3.2 Using the CLI
There are four types of user accounts with different access levels: Admin, Operator, Power
User and User.
■
There is a default Admin account which cannot be deleted. The default username and
password of this account are both admin. You can also create more Admin accounts.
■
If you create Operator, Power User or User accounts, you need go to the AAA section
to create an Enable Password. If needed, these types of users can use the Enable
Password to change their access level to Admin.
3.2.1 Creating Accounts
Follow these steps to create an account:
Step 1
configure
Enter global configuration mode.
Downloaded from
