User Guide
683
Configuring IPv6 IMPB
IPv6 Source Guard Configuration
Step 4
show ipv6 verify source [ interface { fastEthernet
port |
gigabitEthernet
port |
ten-
gigabitEthernet
port |
port-channel
port-channel-id
} ]
Verify the IP Source Guard configuration for IPv6 packets.
Step 5
end
Return to privileged EXEC mode.
Step 6
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable IPv6 Source Guard on port 1/0/1:
Switch#configure
Switch(config)#interface gigabitEthernet
1/0/1
Switch(config-if)#ipv6 verify source sipv6+mac
Switch(config-if)#show ipv6 verify source interface gigabitEthernet
1/0/1
Port Security-Type LAG
---- ------------- ----
Gi1/0/1 SIPv6+MAC N/A
Switch(config-if)#end
Switch#copy running-config startup-config
Downloaded from
