Configuring Access Security
Access Security Configurations
User Guide
515
Protocol V1
Select
Enable
to enable SSH version 1.
Protocol V2
Select
Enable
to enable SSH version 2.
Idle Timeout
Specify the idle timeout time. The system will automatically release the
connection when the time is up.
Maximum
Connections
Specify the maximum number of the connections to the SSH server. New
connection will not be established when the number of the connections reaches
the maximum number you set.
Port
Specify the port using for SSH.
2) In the
Encryption Algorithm
section, enable the encryption algorithm you want the
switch to support and click
Apply
.
3) In
Data Integrity Algorithm
section, enable the integrity algorithm you want the switch
to support and click
Apply
.
4) In
Import Key File
section, select key type from the drop-down list and click
Browse
to
download the desired key file.
Key Type
Select the key type. The algorithm of the corresponding type is used for both key
generation and authentication.
Key File
Select the desired public key to download to the switch. The key length of the
downloaded file ranges of 512 to 3072 bits.
Note:
It will take a long time to download the key file. Please wait without any operation.
2.1.5 Configuring the Telnet Function
Choose the menu
SECURITY
>
Access Security
>
Telnet Config
to load the following
page.
Figure 2-8
Configuring the Telnet Function
Enable Telnet and click
Apply
.
Telnet
Select
Enable
to make the Telnet function effective. Telnet function is based on the
Telnet protocol subjected to TCP/IP protocol. It allows users to log on to the switch
remotely.
Port
Specify the port using for Telnet.
Downloaded from
