Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 603

Page: 603 / 646

602

9-1. Specifications



A25A-FKS engine

: The coolant capacity is the quantity of reference.

If replacement is necessary, contact your Toyota dealer.

Capacity

Without
engine oil
cooler

6.9 L (7.3 qt., 6.1 Imp.qt.)

With engine
oil cooler

7.0 L (7.4 qt., 6.2 Imp.qt.)

Coolant type

Use either of the following:
• “Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycolbased

non-silicate, non-amine, non-nitrite, and non-
borate coolant with long-life hybrid organic
acid technology

Do not use plain water alone.

Ignition system (spark plug)

Make

M20A-FKS
engine

DENSO FC20HR-Q8

A25A-FKS
engine

DENSO FC16HR-Q8

Gap

0.8 mm (0.031 in.)

NOTICE

■

Iridium-tipped spark plugs

Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.

Electrical system (battery)

Specific gravity reading at 20°C
(68°F):

1.25 or higher

If the specific gravity is lower than the standard
value, charge the battery.

Charging rates

Quick charge

15 A max.

Slow charge

5 A max.

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands

Toyota RAV4 (RHD) - MMC, Owner'S Manual

Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands