Toyota RAV4 (RHD) - MMC, Owner'S Manual

Page: 81 / 646

80 1-2. Child safety
seat, if there is a gap between
the child seat and the seatback,
adjust the seatback angle until
good contact is achieved.
2 If the head restraint interferes
with the child restraint system
installation and the head
restraint can be removed,
remove the head restraint. Oth-
erwise, put the head restraint in
the upper most position.
(

P.182)
3 Check the positions of the exclu-
sive fixing bars, and install the
child restraint system to the
seat.
The bars are installed in the clearance
between the seat cushion and seat-
back.
4 After installing the child restraint
system, rock it back and forth to
ensure that it is installed
securely. (

P.79)
■ When using a “MIDI 2” (for Latin
American countries
*
)
Adjust the support leg and ISOFIX con-
nectors as follows:
1 Lock the ISOFIX connectors where
number 2 can be seen.
2 Lock the support leg where 4 holes
can be seen.
*
: Belize, Costa Rica, Dominican
Republic, Guatemala, Haiti, Hondu-
ras, Nicaragua, Panama, Trinidad (&
Tobago), El Salvador, Bahamas,
Jamaica, Barbados, G.Cayman, Anti-
gua, Grenada, St.Lucia, St.Vincent,
St.Kitts, Argentina, Bolivia, Guyana,
Chile, Colombia, Ecuador, Aruba,
Curacao, Suriname, Paraguay, Peru,
Uruguay and St.Maarten
■
When using an “i-Size MIDI” (for
ASEAN countries
*
)
Adjust the support leg and ISOFIX con-
nectors as follows:
1 Lock the ISOFIX connectors where
number 2 can be seen.
2 Lock the support leg where 4 holes
can be seen.