Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 317

Page: 317 / 646

316

4-5. Using the driving support systems



When the panoramic view moni-
tor (if equipped) is displayed

: The RCTA function is malfunction-

ing (



P.311)

■

The RCTA function detection
areas

The areas that vehicles can be
detected in are outlined below.

The buzzer can alert the driver of faster
vehicles approaching from farther
away.

Example:

■

The RCTA function is operational
when

The RCTA function operates when all of
the following conditions are met:

●

The RCTA function is on.

●

The shift lever is in R.

●

The vehicle speed is less than
approximately 8 km/h (5 mph).

●

The approaching vehicle speed is
between approximately 8 km/h (5
mph) and 28 km/h (17 mph).

■

Setting the buzzer volume

The buzzer volume can be adjusted on
the multi-information display. (



P.114)

■

Conditions under which the RCTA
function will not detect a vehicle

The RCTA function is not designed to
detect the following types of vehicles
and/or objects.

●

Vehicles approaching from directly
behind

●

Vehicles backing up in a parking
space next to your vehicle

●

Vehicles that the sensors cannot
detect due to obstructions

Approach-

ing vehicle

Speed

Approxi-

mate

alert dis-

tance

Fast

28 km/h (18

mph)

20 m (65 ft.)

Slow

8 km/h (5

mph)

5.5 m (18 ft.)

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands

Toyota RAV4 (RHD) - MMC, Owner'S Manual

Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands