Toyota RAV4 (RHD) - MMC Owner'S Manual Download Page 115

Page: 115 / 646

114

2-1. Instrument cluster

■

4WD system display (4WD
models)

Front tire direction display

Displays the operation amount and
direction of the steering wheel via
changes to the front tires on the display.

Torque distribution display

Displays the drive status of each wheel
in 6 steps from 0 to 5.

G-force display

Displays the size and direction of the G-
force applied to the vehicle via changes
to the position of the ball on the display.

Maximum G-force course

This item is linked with the G-force dis-
play and the course of the past move-
ment of the ball is displayed.

Press and hold

to reset the record.

Wheel spin display

When a tire is spinning, its icon on the
display changes its color and blinks.

: This item is displayed only when driv-

ing mode is set to sport mode.

Vehicle settings and the content
displayed on the screen can be
changed by using the meter control

switches.

■

Setting procedure

Operate

of the meter

control switches and select

Operate

of the meter

control switches and select the
desired item.

• If the function is turned on and

off or the volume, etc. is changed
on the setting screen, the setting

is changed each time

pressed.

• For functions that allow opera-

tion contents, display contents,
etc., of function to be selected,
the setting screen is displayed by

pressing and holding

. When

the setting screen is displayed,
select the setting or desired

value (time, etc.) with

After changing the settings,

press

of the meter control

switches.

■

“Clock :00” (if equipped)
(



P.102, 107)

Select to set up the clock setting.

■

LTA (Lane Tracing Assist)

(if equipped) (



P.269)

Select to set up the following items.



“Lane Center”

Select to enable/disable the lane cen-
tering function.



“Steering Assist”

Select to enable/disable steering wheel

Settings display

Summary of Contents for RAV4 (RHD) - MMC







































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands

Toyota RAV4 (RHD) - MMC, Owner'S Manual

Search results

Summary of Contents for RAV4 (RHD) - MMC

Reviews:

Related manuals for RAV4 (RHD) - MMC

Brands by name

Popular brands